Abba superbike stand.

Simple to use, safe to work on with both wheels off the ground.

This novel take on a motorcycle paddock stand from Abba is a great addition to your home workshop for general maintenance and cleaning.

It’s a fact of life that if your bike has – or can have an optional – centre stand, then life looking after it is so much easier. You can easily spin the rear wheel to clean and lubricate the chain, as well as check and adjust chain tension, for example or remove one of the wheels. It is also more convenient – and safer – for storing the bike if you don’t use it over winter, for example.

However, many bikes can’t accommodate a centre stand. Sportsbikes, for example, tend to have bodywork in the way and a low centre of gravity and hence, low ground clearance may not leave enough room for one. In this case, the usual method of lifting the bike off the ground – either the front or rear wheel or both – is with a paddock stand(s). These will allow one or both wheels to be raised off the ground so they or the suspension can be removed for work.

The abba Superbike Stand requires no modifications or parts to be fitted to your bike whatsoever, your machine stays totally standard. Should you change your motorcycle its a simple case of upgrading your fitting kit for your new machine, fittings can be changed on the stand in a matter of seconds.

The abba Superbike Stand locks to both sides of your bike, ensuring rock solid security when your bike is fitted to the stand.

Features:

• Totally safe, 1 person operation – guaranteed!
• Extremely stable and secure, as the abba superbike stand locks onto a solid point it is far more stable than a conventional paddock stand.
• Both wheels can be safely suspended off the ground at the same time when used with the abba front lift arm or even your own jack/prop.
• The abba superbike stand can be used for full maintenance, it will allow the whole bike to be disassembled including the shock, linkage, forks, yokes, engine and even the swing-arm (with optional swing-arm removal kit)
• No fittings needed to be permanently fitted to the bike, your machine stays totally standard.
• The abba superbike stand fits both single sided and twin sided swing-arm motorcycles, there is no need to change your stand if you change your bike.
• The abba superbike stand will not scratch any part of your swing-arm, unlike most conventional paddock stands.
• Does not restrict access or get in the way when working on the wheels of your bike, unlike paddock stands.
• Extremely compact when not in use, can be hung on the wall and will take up far less space than any other motorcycle stand.
• Fully welded construction, No “flat pack” type assembly, no cheap plastic parts. Built to last!
• The unique bespoke fitting kits allow this stand to be adaptable to fit over 500+ different models of motorcycle.
• When fitted to your bike the abba superbike stand adds extra security against theft.
• Many “add-ons” can be purchased for the superbike stand to store tools, lift the front wheel easily, manoeuvre your bike around, remove the swing-arm as well as fitting kits to fit over 500+ motorcycles.
• All abba products are designed & developed in the UK at our headquarters in Essex by skilled engineers with over 30 years experience in the motorcycle industry.
• Made to the highest standards and all backed up with a full guarantee for peace of mind.
• Unsure of anything? Give us a call, you will speak to a real human with technical knowledge of the product and happy to advise you on any questions you might have.

_{We may receive a commission if you purchase a product using the affiliate links on any page of this website. This is at no cost to the purchaser, however does support our website and helps us to continue to build with more great content.}